「运城快速门」硬质快速门铝合金轨道维修与更换

「运城快速门」硬质快速门铝合金轨道维修与更换



Maintenance and Replacement of Aluminum Alloy Track for "Qinhuangdao Fast Gate" Hard Fast Gate

 

硬质快速门的发现可以说是行业内开展的一个里程碑，无论从表面、机能、实用性上，都让用户最满意



The discovery of hard fast doors can be said to be a milestone in the industry. Regardless of the surface, function and practicability, the reason why the fast doors of Tangshan are shaking sharply when running? Let users be most satisfied

 

特别提示，在任何安装场所，都应在门前安装防撞柱及提示减速慢行标识



Special tips, in any installation site, should be installed in front of the door anti-collision column and prompt slow-down signs

车辆速度过快，撞击快速门的现象不在少数



Vehicle speed is too fast, the phenomenon of impacting the fast door is not rare



如您的门很不幸的遇到的这种情况，那么很不幸的，您就需要用到以下的文章了



Unfortunately, if this happens to your door, you will need to use the following articles.

 

「太原硬质快速门」快速门铝合金轨道维修与更换



Maintenance and Replacement of Aluminum Alloy Track for Taiyuan Hard Fast Gate

铝合金轨道布局说明：



Aluminum alloy track layout description:



外观经由阳极氧化加有机着色处理。门框两侧设有对射电眼，快速门下方有障碍物时，快速门体连结开启状态。



Appearance is treated by anodizing and organic coloring. The two sides of the door frame are equipped with radio eyes. When there are obstacles under the fast door, the fast door body is connected and opened.
 

两侧门柱内部配平衡弹簧，和门板重量连结一定的平衡性，同时减轻电机运行时的负载，运行顺畅自如。一体式的传动系统，使得门体两侧均匀受力，整体运行通畅。



The balance springs are fitted inside the doorposts on both sides. Why does the "Tangshan Express Gate" flutter sharply when it runs? It has a certain balance with the weight of the door plate, and at the same time reduces the load of the motor when it is running, so it can run smoothly and freely. The integral transmission system makes the two sides of the door body bear uniform force, and the whole operation is smooth.



因为轨道内部布局复杂，如需维修建议整套更换，避免您自己连接时操作不专科，造成设备后期运行不顺畅



Because the internal layout of the track is complex, if maintenance is needed, it is recommended to replace the whole set, so as to avoid the unskilled operation of your own connection, resulting in the unsmooth operation of the equipment in the later stage.