「太原堆积门」HOLIP海利普快速门变频器限位设定方法

「太原堆积门」HOLIP海利普快速门变频器限位设定方法


Limit Setting Method for the Inverter of "Taiyuan Accumulated Gate" HOLIP Helip Fast Gate
 

龙盛门业为中国快速门十大品牌之一，拥有大型生产基地和先进的生产设备


Longshengmen is one of the top ten brands of China Fast Gate. It has a large production base and advanced production equipment.


总厂位于辽宁省沈阳市，并在全国各省市如：大同，朔州，忻州，太原，阳泉，吕梁，长治，临汾，三门峡，运城等地有售后及维修人员。


The factory is located in Shenyang, Liaoning Province, and has after-sales and maintenance personnel in various provinces and cities throughout the country, such as Datong, Shuozhou, Xinzhou, Taiyuan, Yangquan, Lvliang, Changzhi, Linfen, Sanmenxia, Yuncheng, etc.

解决用户在购买了我们的快什么之后，不用担心不会安装，无人管售后的烦恼。


Solve the user after buying our fast what, do not worry about not installing, regardless of after-sales worries.


对于一樘快速门而言，变频器的质量是很关键的，因此它的安装和调试工作也十分重要


For a diaphragm fast door, the quality of the frequency converter is very important, so its installation and debugging work is also very important.


调试好了，能够让用户在后期的使用过程中，更加的安全和方便，而且故障率也会明显降低的。


After debugging, it can make users safer and more convenient in the later use process, and the failure rate will be significantly reduced.


快速门的变频器品牌有很多，常见的像SFT，SEJ,士林，三菱，KST，阿兰达，格兰德，佰阔捷，海利普HOLIP等。


There are many brands of Fast Gate Inverter, such as SFT, SEJ, Shilin, Mitsubishi, KST, Alanda, Grand, Baikuojie, Helip HOLIP and so on.


「太原堆积门」HOLIP海利普快速门变频器限位设定方法


Limit Setting Method for the Inverter of "Taiyuan Accumulated Gate" HOLIP Helip Fast Gate

1、G和X4连接在一起


1. G and X4 are connected together


2、按住急停按钮，同时按住下行键10秒。


2. Press the emergency stop button and hold down the downlink button for 10 seconds.


3、光调下限位，下到合适位置按急停按钮。再按下键10秒。


3. Optically adjust the limit and press the emergency stop button at the appropriate position. Press the key again for 10 seconds.


4、调上限位时，上导合适位置，按住急停俺就，再按上键10秒


4. When adjusting the upper limit, the upper guide should be in the right position, hold down the emergency stop and press the upper key for 10 seconds.


5、调试完成后.


5. After debugging.


如按住上述方法无法完成调试，标识变频器或编码器损坏，可联系厂家更换，或联系龙盛门业。


If the debugging cannot be completed by holding down the above method and identifying the damage of the frequency converter or encoder, you can contact the manufacturer for replacement or Longsheng Gate Industry.


「太原快速门」「运城快速门维修」「临汾快速门厂家」


"Taiyuan Express Gate", "Yuncheng Express Gate Maintenance", "Linfen Express Gate Manufacturer"